Test sanitizer (free chlorine) and pH using your 4-way Test Strips. If necessary adjust pH to 7.4-7.6. If sanitizer level tests below 1.0 ppm, slightly open your feeder to maintain a 1.0-1.5 ppm sanitizer level.

Add Simplicity Tabs once a week by carefully filling the feeder per the manufacturer’s directions. If the feeder is not a floating type, turn off the pump before opening the feeder and stand to the side when removing the lid.

Add Simplicity Clear at the rate of one-half container per 10,000 gallons of pool water once a week. With the pump running, broadcast Simplicity Clear into the deep end of the pool.

Use a pool brush to disperse any granules which may have settled to the bottom of the pool. Swimming may resume 15 minutes after applying Simplicity Clear.